Innokin Coolfire Z80 Box Mod Kit developed by Innokin, The box mod received an ergonomic zinc alloy body, painted in four color combinations. The backside was rounded under the grip and decorated with a stitched artificial leather insert. A glossy control panel, consisting of a fire button, a display, a couple of small keys and a USB-C port, was stretched along the narrow front side. The landing site was limited to a diameter of 25 mm. Access to the battery compartment was limited by a twist-off cover with a hinged key.

A proprietary board with a power range from 6 to 80 watts is responsible for control and safety. In addition, preheat and an alternative Refresh mode are provided to refresh the flavor and extend the life of the winding. An external 18650 battery is used as a battery(Not Included). Charging should be carried out via USB Type-C with a current of 1.7A. The available resistance ranges from 0.1 to 3.5 ohms.

The mod is accompanied by Zenith 2 with a 5.5 ml protected flask. The filling hole is hidden under the rotating cover. The drip tip is realized in duplicate for different types of airflow. A pre-installed 0.3 ohm evaporator is located under the dome. In addition, there is an additional option with a resistance of 0.8 Ohm in reserve. The tightness can be adjusted by means of a ring on the base of the tank.

Specifications:

• 5.5 ml tank capacity
• 80 watts of power
• External and replaceable 18650 battery
• A Zinc-alloy body material
• Adjustable wattage range of 6-80W
• Adjustable voltage range of 1-7.5V
• Product full description is Cool Fire Z80 Zenith II Kit
• Replaceable glass
• Resistance range of 0.1 Ω to 3.5Ω
• Maximum current output of 28.5A
• Adjustable puff cut off time ranging 3-18seconds
• The charging current is 5V/1.7A
• Threaded 510
• Available in Leather white, Ash grey, Leather black, and Cloudy grey

Includes:

• 1x replacement glass
• 1x replacement Z-coil
• 1x type-c charge cable
• 1x RDL Drip trip
• 1x Cool Fire Z80 Mod
• 1x Zenith II Tank
• 1x O-Ring set